Kawasaki Z1000 Forum banner

Clean the bobbins.

  • Rubbish

    Votes: 0 0.0%
  • Worked for me

    Votes: 1 100.0%
1 - 2 of 2 Posts

4 Posts
Discussion Starter #1
Good evening,
I've read it all and know nothing. My symptom is a pulsing front brake approaching the stop on my 2003 Z1000. I put the bike on a rear and front stand and could not see any evidence of a bent rotor. I replaced the pads and fluid successfully. I used a 180 sandpaper with a block to rough up the discs. The pulsing remains. Several videos and forums indicate I need to clean the bobbins. I'm going to borrow the tool that measures run out from a friend but wanted to see if anyone has successfully used cleaning the bobbins to fix the same problem. Thanks.
1 - 2 of 2 Posts