Kawasaki Z1000 Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
752 Posts
I went with CRG bar end (left side only). Rizoma makes some seriously sick looking mirrors - but at $300 a pair, its out of my price range...besides, I prefer the look of bar end mirrors anyway.

but check out Rizoma Circuit 851 mirrors.
 

·
Registered
Joined
·
12 Posts
mirrors

I also went with CRG bar end mirrors. The Arrow Billet version for both right and left. I love the look and they are functional. I should point out that they are a bit convex, so the image in the mirror is both broader than the little size would suggest and the items in the image are likely to be closer than they look.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
Thanks guys lets see some more. Had bought a pair of CRG's for my zrx and never put them on sold bike.
 

·
Registered
Joined
·
35 Posts
Do the CRG mirrors replace the bar ends, or do you just mount them on the stock bar ends?

Im thinking about getting a set of bar end mirrors
 

·
Registered
Joined
·
5 Posts
Very nice, I have the Rhinos with CRG Lane Splitters. I can see much better with them installed... not to mention the bike looks even more hooligan with them IMO.
 

·
Registered
Joined
·
4 Posts
Hi VIC... 28.07.2011

Can you confirm you buy the Bar End Weights take off the stock ends and then the CRG Arrow Mirrors clamp to the Bar End Weights..?

Do you need to buy replace the M8 bolts from the stock ends or can they be re used..?

What's the vision like with those mirrors...?

Are you in the UK.. if so where did you buy the Bar Ends and Mirrors from..?

Cheers Poole_2010_z1k
 

·
Registered
Joined
·
752 Posts
Hi VIC... 28.07.2011

Can you confirm you buy the Bar End Weights take off the stock ends and then the CRG Arrow Mirrors clamp to the Bar End Weights..?

Do you need to buy replace the M8 bolts from the stock ends or can they be re used..?

What's the vision like with those mirrors...?

Are you in the UK.. if so where did you buy the Bar Ends and Mirrors from..?

Cheers Poole_2010_z1k
This is the same set up I have going.

Yes - go to Rhinomoto.com and you can order the bar ends right off the site. They replace the OEM bar weights, and have a cut out to accommodate the CRG bar end mirrors. My new bar ends came with bolts - no need to reuse the stock bolts.

I cant speak for the quality of the vision in the mirrors that VIC is running, as I am running CRG Lane Splitters...and I can tell you that the vision is amazing considering that this mirror is under 3" in diameter.
 
1 - 11 of 11 Posts
Top