Kawasaki Z1000 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
81 Posts
I had this same question, here is how to do it...

Warm the bike up completely. From the left side of the bike, looking towards the throttle bodies, there is a gold screw that you can screw in and out, it stucks straight down from the middle of the throttle bodies. Adjust it accordingly. Bike should idle 1000-1200 rpm when warm.

under the silver part here:
 

·
Registered
Joined
·
355 Posts
Now that is some good info to know. Thanks guys i was also wondering not that I need to adjust mine but just curious.
 

·
Registered
Joined
·
1 Posts
I had this same question, here is how to do it...

Warm the bike up completely. From the left side of the bike, looking towards the throttle bodies, there is a gold screw that you can screw in and out, it stucks straight down from the middle of the throttle bodies. Adjust it accordingly. Bike should idle 1000-1200 rpm when warm.

under the silver part here:
Good day hope all well i need to ask Just beneath the throttle body there is that black plastic piece with a cable in it what does it do ?? as i see on my bike the cable is missing and the bike idles very high.
 
1 - 7 of 7 Posts
Top