Kawasaki Z1000 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Sorry for this one but I just have to check - is the compression on the front forks of the ninja 1000 only adjustable on one fork whereas the rebound is on both?
 

·
Super Moderator
Joined
·
38 Posts
Yup. I'm working on a project to use the lowers from an 07 ZX10R to replace the lowers on the Ninja 1k. I originally was going to do a complete fork swap since my ZX10R forks have AK20's in them, but the lower tripple ID is larger on the Ninja 1k. Haven't been able to pull the wheel yet to see if the axel from the ZX10R will fit b/c the hole under the tripple in the Ninja 1k is huge compared to the Zx10R. I need a new insert to fit and lift the front.

Currently I'm running nearly max compression to get the feel close to the way I like it. Traxxion does have a valving set up for the forks though. And they will be revamping my AK20's for the Ninja 1k forks if my project doesn't work out.
 
1 - 3 of 3 Posts
Top