Kawasaki Z1000 Forum banner

21 - 26 of 26 Posts

·
Registered
Joined
·
198 Posts
As soon as my buddy is back from his holiday can pick up my manual and look it up for you, you might be faster calling a local kawasaki dealer for the info tho

Verstuurd vanaf mijn SM-G975F met Tapatalk
 

·
Registered
Joined
·
37 Posts
Discussion Starter #24
On my diagram 13089C(marked red) is located in the middle and quotes 6 plates. The one you are referring to (on the grooves of the pressure plate) is just 13089( marked green), you will only need 1 of those.





This is you basic starting point, from here you start measuring and swap out 13089C plates, for either 13089B or 13089D until you are within the tolerance stackheight.
Redid the whole clutch with the oem friction plates and with the 2.3 plates swapping them out with 2.0 or 2.6 everything works as normal again, hopefully now my clutch will stop slipping at the top end in 5 & 6th gear at 6K, thanks soo much
 

·
Registered
Joined
·
410 Posts
Why did you replace the plates? What was the initial problem you were having?
 
21 - 26 of 26 Posts
Top