[504rider]

How?:dontknow::dontknow:

 

[kawtoy_77]

It should tell you in your service manual, and possibly your owner's manual.

 

[So-Crates]

Silver dial on the left handlebar. Rotate it to tighten or loosen the cable...you want enough slack that the lever can be moved a slight bit without disengaging the clutch.

 

[kawtoy_77]

Silver dial on the left handlebar. Rotate it to tighten or loosen the cable...you want enough slack that the lever can be moved a slight bit without disengaging the clutch.

I think the slack should be between 1/16th, and 1/8th... I keep it at 1/16th I think... without checking anyhow....:dontknow:

 

[notabiker]

turn the wheel that the clutch cable goes threw at the clutch lever on the handlebar. one way makes it tighter the other way makes it looser. loosen it i until you have a little PLAY in the lever or cable. just make sure it is not tight.

 

[BennyV]

Ideally you want about 5mm of play in your clutch lever.